Filter
Top Products
Page 26
PROGRAMMING FUNCTIONS - (cont.)
SET PULSE BREW - BY EXAMPLE
This function allows adjustment of the pulse brew
by first observing the flow of water for on and off
times.
Procedure to set pulse brew by example:
NOTE: The procedure to enter the Pulse Brew Function
(Page 21) must be performed prior to following
the steps listed below.
1. Press and release YES. The display should now
read SET BY EXAMPLE.
2. Press and release YES. The display will read
CONTAINER READY?
Place a container under the sprayhead. Place a
brew funnel containing a filter and grounds on top
of the container so that the spray and coffee bed
can be viewed. (See Fig. 1)
3. Choose the batch size to be set by pressing the pad
next to the indicator light on the brew side. The
batch size indicator selected will be flashing.
4. If everything is in place, press YES in the CON-
TAINER READY? screen. The display will read
PRESS BREW TO SET 1st ON-TIME.
5. Press and release the BREW switch. The brew
water will start to flow into the funnel and the water
level will rise.
6. Watch the flow of water. When it reaches the
desired level in the funnel, press and release the
BREW switch again to end the 1ST ON TIME.
7. The spray will stop and the brew funnel will start
to empty. When the water level in the funnel drains
to the desired level, press BREW switch again to
end the OFF-TIME. This also begins the spray of
water for the final setting.
8. The brew water will begin again and the water level
in the funnel will rise. Watch the flow of water.
When it reaches the desired level, press the BREW
switch to end the LAST ON TIME.(e)
9. The display should now show the 1st, off and last
times for the batch size just programmed. After a
5 second delay, the display will read 3 BATCHES
DONE?
10. When finished press YES in 3 BATCHES DONE?
The display will then read SET PREINFUSION.
11. Press and release the ON/OFF switch (either on
DUAL brewers)located on the front switch panel
to exit the UNITS function and return to the MAIN
SCREEN.
P2288
FIG. 1
SET PULSE BREW ?
NO YES
SET BY EXAMPLE ?
NO YES
CONTAINER RDY ?
NO YES
PRESS BREW TO
SET 1st ON-TIME
3 BATCHES DONE ?
NO YES
PRESS BREW TO
END 1st ON-TIME
PRESS BREW TO
END OFF-TIME
PRESS BREW TO
END LAST ON-TIME
EXIT TO
NEXT FUNCTION
SCREEN
41343 080108