Filter
Top Products
Page 7
PROGRAMMING THE BREWER (cont.)
RECIPE PROGRAMING METHODS
There are three methods of programming the vari-
ous brewing parameters of the SINGLE/GPR DBC or
DUAL/GPR DBC with Smart Funnel Brewer.
METHOD 1:
Using a Smart Funnel and a G9-2T DBC or MHG
Grinder:
Certain coffee NAMES are stored in the G9-2T DBC
or MHG's memory. When a particular name of coffee
is ground into the Smart Funnel, that name and the
batch size selected are transferred from the grinder to
the programming chip located in the funnel's handle.
The funnel is then inserted into the brewer's funnel
rails (left side for DUAL brewers). The sensor coil on
the brewer reads the information contained in the
handle. This then allows the operator to set the BREW
VOLUMES, BYPASS PERCENTAGES, PULSE BREW
TIMES, PREINFUSION TIMES and DRIP-OUT TIMES
for that particular coffee NAME. Each coffee NAME
can be set individually to provide optimum brewing
quality.
METHOD 2:
Using a RECIPE CARD to enter all of the brew set-
tings at one time:
If using a coffee name not in the grinder's memory,
the customer can obtain a RECIPE CARD from the
factory with all the information needed to set up that
particular coffee name. This includes the COFFEE
NAME, BREW VOLUMES, BYPASS PERCENTAGES,
PULSE BREW TIMES, PREINFUSION TIMES, and
DRIP-OUT TIMES.
METHOD 3:
Not using a Smart Funnel and/or a G9-2T DBC or
MHG Grinder:
This allows the operator to enter ONE set of brew-
ing parameters (for each side on DUAL brewers),
in the event a Smart Funnel and/or a G9-2T DBC or
MHG is not used with the SINGLE/DUAL/GPR Brewer.
This is referred to as a NO NAME coffee flavor. If the
brewer does not read the information in the funnel's
handle, it automatically selects the NO NAME brew-
ing parameters set up prior to brewing. This includes
BREW VOLUMES, BYPASS PERCENTAGES, PULSE
BREW TIMES, PREINFUSION TIMES and DRIP-OUT
TIMES for the three batch sizes.
ARE YOU CREATING OR CHANGING A RECIPE FOR A
COFFEE NAME PREVIOUSLY USED IN THIS BREWER?
REFER TO NAME LIST
IN GRINDER MANUAL
CONTACT BUNN-O-MATIC
FOR ASSISTANCE
GO TO REVIEW RECIPES
AND FOLLOW INSTRUCTIONS
TO VIEW A LIST OF EXISTING RECIPES,
GO TO REVIEW RECIPES
AND FOLLOW THE INSTRUCTIONS
GO TO SET NEW RECIPE,
AND FOLLOW THE
INSTRUCTIONS
YOU WILL ENTER NO
NAME BREW SETTINGS
FOR SINGLE BREWERS,
NO NAME LEFT AND NO
NAME RIGHT BREW
SETTINGS FOR DUAL
BREWERS
YOU WILL MODIFY AN
EXISTING RECIPE
DOES THE GRINDER HAVE THE
NAME IN ITS MEMORY?
FOLLOW INSTRUCTIONS
ON THE RECIPE CARD
HAVE YOU RECEIVED A RECIPE CARD
CONTAINING THE NEW RECIPE?
OR
OR
NO
NO
DON'T KNOW
NO
YES
YES
YES
DON'T
KNOW
RECIPES
This diagram allows for the creating, modifying,
or viewing of recipes in the brewer.
P2369-1
41343 080108