Filter
Top Products
Page 15
34. When finished, press the other batch size and repeat
step # 33.
35. When finished setting both batch sizes, press and
release DONE.
36. The display should now read LAST ON:. Adjust the
LAST ON TIME using (-) or (+). If PREINFUSION
is desired, set the LAST ON TIME to PreI.
37. When finished, press the other batch size and repeat
step # 36.
38. When finished setting both batch sizes, press and
release DONE.
39. The display will show the three times just entered.
Press and release each batch size to display the set-
tings for that batch. If the 1
ST
ON TIME is set to OFF,
the display will read PULSE BREW DISABLED. After
a 5 second delay, the display will read 2 BATCHES
DONE?
40. If both the pulse brew settings for both batch sizes
are not correct, press and release NO to return to
the 1
ST
ON TIME setup screen and repeat steps 24
through 39.
41. If both batch sizes are correct, press YES. The
display should now read DRIP TIME.
Setting DRIP TIME:
NOTE: Drip time also controls the solenoid on time
for models with optional funnel locks.
42. The display should now read DRIP TIME, along with
either the word OFF or a time showing. A batch
light will also be blinking.
43. Using (-) or (+), set the amount of time from when
the brew spray ends to when the funnel is emptied
of hot liquid.
44. When finished, press the other batch size and repeat
step #43.
45. When finished setting both batch sizes, press and
release DONE. The display should read 2 BATCHES
DONE?
46. Select YES. The screen should show the name of
the recipe being programmed (modified) along
with SETUP COMPLETE (except for ITCB w/Sweet
meter, step # 47).
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
Setting SWEET METER: Optional on ITCB
This function allows the operator to adjust the amount
of sweetener added to the dilution water. The solenoid
is pulsed on/off for the duration of the dilution cycle.
Setting #1 will produce the least amount of sweetener
(weakest) and (#14) being the most (strongest).
Procedure:
47. The display should now read "SWEETNER"
48. Press (-) to decrease the amount, or (+) to increase.
(Range: 1 - 14)
49. When finished, press and release the right hidden
switch, or press and release the "ENABLE BREW
ON/OFF" switch to return to the main screen.
41581.2 091609