Filter
Top Products
Installation / Assembly
9
2009 Pizza Cart
LTR20091039, Rev. A
www.calspas.com
Installing the Transformer
All grills with electrical
components such as lights or
a convection fan will require
the transformer to be installed
and plugged in before you can
use it. This needs to be done
before the grill is inserted
in the island or modular cart.
When the transformer is
attached to the grill chassis,
use care in placing the grill
in the island cutout to avoid
hitting the transformer.
Remove the transformer 1.
and the metal screws from
the plastic bag.
Place the grill on a sturdy 2.
surface and tilt it back to
show the underside of the
grill.
Using the metal screws, 3.
attach the transformer to
the left side of the grill
near the internal electri-
cal connection. Attach the
metal plate to the out-
side surface of the grill as
shown in the figure below.
When you have rmly 4.
tightened the screws and
nuts, connect the plug
from the transformer to
the grill. Screw on the
stainless steel retainer.