Cal Flame LTR20091039 Oven User Manual


 
Appendix
19
2009 Pizza Cart
LTR20091039, Rev. A
www.calspas.com
Problem: Misalignment of Igniter on Burner
Solution: Check for proper position of the electrode tip, which
should be pointing forward towards the front of the
burner and free of grease to allow proper sparking.
The ignition wire should be connected rmly to the
valve ignition device and electrode. Replace the ig-
nition wire if it is frayed or cracked.
With the gas supply closed and all control knobs set
to the off position, check each position igniter indi-
vidually for the presence of a spark at the electrode.
Push each knob in fully and rotate it about 1/4 turn
to the left (counter-clockwise) until you hear a loud
click. The trigger hitting the strike block should
produce a blue spark at the electrode tip. Return
control knob to the off position before checking the
next igniter.
While the grill is still hot, wait for a minimum of
ve minutes before commencing re-ignition. (This
allows accumulated gas fumes to clear.) If all checks
/ corrections have been made and the gas grill still
fails to operate properly, contact your local Cal
Flame dealer.
Problem: Flashback
Solution: When re occurs in and around the burner tubes, im-
mediately turn off gas at its source and turn the con-
trol knobs clockwise to the ‘OFF’ position. Wait until the
grill has cooled off and then clean the burner tubes and
burners as described on page of this manual.
Replacement Cover
We recommend covering your pizza oven to protect it from the ele-
ments. You may order a cover for your pizza oven through your dealer
or by calling 1-800-CAL-SPAS. The part number for the 22” pizza oven
cover is BBQ878CVR.