Filter
Top Products
13
DO NOT use abrasive cleaners or scouring pads, as they
may scratch the surface of the slow cooker.
6. DO NOT IMMERSE THE 7 QT. SLOW COOKER BASE IN
WATER OR ANY OTHER LIQUID.
7. Store the power cord using the cord wrap feature on the
bottom of the slow cooker base.
8. Place crock in 7 qt. slow cooker base and put lid on top.
Frequently Asked Questions
My 7 qt. slow cooker is not heating; what am I do-
ing wrong? Be sure the power cord is plugged into a suitable
outlet. See page 5 for electrical requirements. Then, check to
make sure both the temperature control knob and the timer are
set. The lights should be illuminated but not blinking. If they are
blinking, the timer is not set. Turn the knob to select a time.
How do I know which heat setting to choose? Begin
by looking at the 7 qt. slow cooker recipes in this guide. They
provide suggested cook times and heat settings. Most foods
may be cooked on either the “Low” or the “High” setting. It
depends on the amount of time available for cooking and how
tender you want the food to become. The longer the cook time,
the more tender the food.
I selected a temperature setting, but now all the
lights have gone out. What happened? If you se-
lect a temperature setting and let the 7 qt. slow cooker sit for
two minutes without selecting a cooking time (which starts the
cooking cycle), the 7 qt. slow cooker control lights will turn off.
Simply turn the temperature knob to “Off”, turn it again to select
a cooking temperature, and then turn the timer knob to select a
cooking time.
WARNING