Capresso Impressa Z5 Espresso Maker User Manual


 
Never repair or open the machine yourself. All repairs should
be performed only by an authorized service center.
PLEASE, DO...
Fill water tank with fresh, cold water only.
Remove any foreign particles (small stones) from coffee beans.
Let frozen beans thaw 3 to 4 hours before pouring them into
the bean container.
5. FACTORY SETTINGS
Each machine leaves the factory with the following settings:
Milk Button..................... 20 seconds
Cappuccino Button ........ 15 seconds milk, 3 oz. coffee, strength
NORMAL, temperature HIGH:
Special Coffee Button.... 3 oz., XSTRONG, HIGH
Hot Water Button ........... 6 oz.
1 Espresso Button.......... 1.5 oz., STRONG, HIGH
2 Espresso Button.......... 3.0 oz., STRONG, HIGH
1 Coffee Button.............. 5.0 oz., NORMAL, HIGH
2 Coffee Button.............. 10.0 oz., NORMAL, HIGH
Please note: You can change all above presets (chapter 26).
You can also override the strength and the cup size before/during
actual brewing. Overriding will not change the preset values.
Filter................................ No (not installed) (chapter 23)
Hardness Level............... 10º (chapter 24)
Auto-Off.......................... 2 Hours (chapter 26.9)
Grinder Fineness ............ Middle position (chapter 7)
Economy ........................ NO SAVE (chapter 26.6)
Time format .................... AM/PM (chapter 26.13)
Volume ml/oz.................. in ounces (chapter 26.13)
Language ....................... English (chapter 26.12)
Time ............................... Not set (chapter 26.7)
Unit On (Auto-On) ......... Not set (chapter 26.8)
CUP ILLUMINATION (Fig. 1,7)
The cup illumination adds a dramatic touch to brewing coffee.
Providing the main power switch is on, you can activate the cup
illumination for 1 minute by pressing any button.
6. PREPARING THE MACHINE FOR THE FIRST TIME
Make sure all accessories, literature and any other items are
removed from the bean container and the water tank.
DO NOT install the Clearyl water filter now. (chapter 23)
Make sure the machine sits on an even, flat surface and the
drawer, tray and used coffee container are inserted (Fig.1, Fig. 2).
Plug-in machine.
6a. FILLING THE WATER TANK
Please note: Only use fresh, cold water. Never fill water tank
with carbonated water, milk or any other liquid.
Open the Water Tank Lid, remove the water tank, rinse and fill
with fresh, cold water (Fig. 7).
Replace water tank and make sure that the two slots are
engaged over the two hooks to secure the tank properly.
Close lid.
6b. FILLING THE BEAN CONTAINER
Please note: To insure that your conical burr grinder will work
for a long time, do not use it with any kind of coated or flavored
12.