Filter
Top Products
a. Push the Rotary Dial. SELECT PRODUCT.
b. Push the beverage button for which you want to change the
temperature, e.g. the 1-cup Espresso Button. The display
shows
1 ESPRESSO HIGH.
c. Turn the Rotary Dial and select NORMAL (example).
d. Push the Rotary Dial to confirm. CONFIRMED ✔
e. TEMPERATURE. To change another beverage button start
with a. again.
26.3 COFFEE STRENGTH / AROMA
You can set the coffee strength for the Cappuccino Button, the
Special Coffee Button and the four coffee buttons on the right
side to
XMILD, MILD, NORMAL, STRONG, XSTRONG. For
factory settings see chapter 5. In XMILD the 1-cup buttons grind
for about 4 seconds, in XSTRONG for about 8 seconds. The 2-
cup buttons grind between 7 and 10 seconds respectively. The
minimum amount of coffee to be ground is approx. 5 grams, the
maximum approx. 16 grams.
Please note: the amount of ground coffee also depends on the
fineness settings of the burr grinder. The coarser the setting the
more coffee is ground through the burrs.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows
FILTER.
• Turn the dial until the display shows: AROMA
a. Push the Rotary Dial. SELECT PRODUCT.
b. Push the beverage button for which you want to change the
coffee strength, e.g. the 2-cup Coffee Button. The display
shows 2 COFFEE NORMAL.
c. Turn the Rotary Dial and select XSTRONG.
d. Push the Rotary Dial to confirm. CONFIRMED ✔
e. AROMA. To change another beverage button start with a.
26.4 CAPPUCCINO PROGRAMMING
Chapter 25.2 explains how to change the pre-sets for milk and
the coffee volume while the Z5 is brewing. In programming you
can simply change the pre-sets by changing the values shown in
the display without making the beverage.
COFFEE READY
• Push and hold the Rotary Dial until you hear a beep and the
display shows
FILTER.
• Turn the dial until the display shows: CAPPUCCINO
a. Push the Rotary Dial. The display shows MILK 15 SEC
b. Turn the Rotary Dial until the desired duration is displayed,
e.g.
MILK 20 SEC.
c. Push the Rotary Dial to confirm. CONFIRMED ✔.
Now the display shows
COFFEE 3 OZ.
d. Turn the Rotary Dial until the desired coffee volume is
displayed, e.g. to
COFFEE 5 OZ.
e. Push the Rotary Dial to confirm. CONFIRMED ✔
Now the display shows CAPPUCCINO MILK 20 SEC.
f. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial.
COFFEE READY
26.5 MILK PROGRAMMING
Chapter 25.3 explains how to change the pre-sets for milk
volume while the Z5 is brewing. In programming you can simply
change the pre-set by changing the duration shown in the
25.