CDA RC 9021 Cooktop User Manual


 
12
Function Selector knob (fig. 16)
Rotate the knob clockwise to set the oven for one of the following functions.
Oven Light
By setting the knob to this position, only the oven light comes on.
It remains on in all the cooking modes.
Traditional Convection Cooking
The upper and lower heating elements come on. The heat is dispersed by natural convection and the
temperature must be set to between 50° and 250°C via the thermostat knob.
The oven must be preheated before cooking.
Recommended for:
Food that requires the same degree of cooking both inside and out, for example roasts, spare pork ribs,
meringues etc.
Thermostat Knob (fig. 15)
This only sets the cooking temperature and does not switch the oven on.
Rotate clockwise until the required temperature is reached (from 50 to 250°C).
The light between the thermostat and the function selector will illuminate when the oven is switched on
and turns off when the oven reaches the correct temperature.
The light will cycle on and off during cooking in line with the oven temperature.
Fig. 15 Fig. 16