CDA RC 9021 Cooktop User Manual


 
8
Semi - Automatic Cooking
This is used to switch the oven off automatically after the desired cooking time has elapsed.
There are two ways to set the semi-automatic cooking function:
1. Set the length of time you need to cook the food by pushing the
button and the button to
advance, or to go backwards (Fig. 9).
This sets the desired “stop” time.
AUTO and the symbol will be on.
or
2. Set the time you need the food to stop cooking by pushing the button and the button to
advance, or to go backwards if you have passed the desired time (Fig. 10).
AUTO and the symbol will be on.
Then set the temperature and the cooking program (see the relevant sections).
The oven is switched on and it will switch off automatically at the end of the desired time.
During cooking, the symbol remains on and by pressing the button you can see the time that
remains until the end of the cooking.
The cooking program can be cancelled at any moment by pushing the
button.
At the end of the cooking period, the oven and the
symbol will disappear, AUTO will flash and a buzzer
will sound and can be stopped by pushing any of the buttons except the / buttons.
Turn the function selector switch and thermostat knobs to zero and put the programmer onto “manual”
by pressing the button.
Attention: After a power cut the clock resets to zero and cancels the set programs. After a power cut,
three zeros will flash on the display.
A
U
T
O
A
U
T
O
Fig. 9 Fig. 10