27
Inside of Oven
The oven should always be cleaned after use when it has cooled down.
The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary
chemical cleaners may be used after first consulting with the manufacturers recommendations and testing
a small sample of the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used
on the cavity surface.
NOTE: The manufacturers of this appliance will accept no responsibility for damage caused by chemical
or abrasive cleaning.
Let the oven cool down and pay special attention no to touch the hot heating elements inside
the oven cavity.
Assembling and Dismantling of the Side Runner Frames
– Fit the side runner frames into the holes on the side walls inside the oven (Fig. 27).
– Slide the tray and rack into the runners (Fig. 28).
The rack must be fitted so that the safety catch, which stops it sliding out, faces the inside of the oven.
– To dismantle, operate in reverse order.
Fig. 27
Fig. 28