Filter
Top Products
19
5/ DETERGENT PRODUCTS AND ADJUSTING THE WATER SOFTENER
Important:
The settings for multipurpose products disable the warning lights for rinse aid and salt only
when the setting is 0-10°F.
• Loading the multi-purpose tablet dispenser
To assist in loading the detergent, the distributor is situated on the front of the upper basket. It is
compatible with all the products recommended for dishwashers.
• Place the tablet
in the external compartment (Fig 04 on previous page) or, for optimum
results, pull out the distributor’s drawer and lay the tablet inside
(Fig 05 on previous page).
- Close the dispenser.
TTeessttiinngg ssttrriipp
HHaarrddnneessss
0-10°F 10-25°F
MMuullttii--ppuurrppoossee
““EExxttrraa DDrryy””
((rrééggllaaggee dd’’oorriiggiinnee))
““SSppaarrkklliinngg
CClleeaann””
Soak
Rapid
30'
Bio 50°
STOP
Eco 55°
Intensive 65°
9h
6h
3h
Delay
Timer
Normal 60°
Select
Antibacterial
9h
6h
3h
Salt
Rinse Aid
9h
6h
3h
Salt
Rinse Aid
Wash Rinse Dry End
Wash Rinse Dry End
• To adjust the water softener
— Turn the selector switch to
““SSeelleecctt””
. The six indicator lights come on, showing you that you are
in adjustment mode.
— Press the
““DDeellaayy TTiimmeerr””
button once; you can tell the setting from which indicator lights blink.
Please refer to the table below.
— You must change this setting if you use multipurpose tablets.
To do so, press repeatedly on the
““DDeellaayy TTiimmeerr””
button and select a water hardness of either
00 --1100 °° FF oorr 1100 -- 2255°° FF..
• To change the option (if necessary)
— Press the “4-in-1” button to select the setting “Sparking Clean”.
— Press once more to go back to “Extra Dry” .
— The setting is saved automatically when you exit the Select.
• FOR MULTI-PURPOSE PRODUCTS : USING THE BUTTON
• Your machine can be specially adjusted to use multi-purpose products if
the water hardness is less than 25°F.
Tip:
Your dishwasher’s button adjusts to the wide range of multipurpose products. It
has two possible settings, which you access via the Select.
“Extra Dry”
(the factory setting) improves the results after drying where the
““22 iinn 11””,, ““33 iinn 11”” oorr ““44 iinn 11””
multipurpose product offers a lower level of performance.
“Sparking Clean”
improves the shine of your crockery, whatever sort of multipurpose product
you use.
: voyant éteint : voyant allumé fixe : voyant clignotant
indicator light off indicator light on indicator flashing