Filter
Top Products
37
14/ INDICATIONS FOR THE TESTING LABORATORIES
• Details common to all models
— Washing capacity - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12 standard place settings
— Arrangement of the items - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Figs. A-B-C; see next page
— Loading as per the indications on next page, without side shelves
or stemmed glass support, and 5 cup/saucer supports
(4 for12 saucers & 1 for 2 cups)
— Setting for upper basket - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Low position
— Setting for rinsing product distributor - - - - - - - - - - - - - - - - - - 3
— Adjusting the water softener - - - - - - - - - - - - - - - - - - - - - - - - - - - 0-10°F
For detailed information on the comparison tests regarding the level of soiling, the types of
crockery and cutlery, etc., contact the equipment manufacturer before commencing the tests.
• Tests to Standard EN 50242:
— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - -
““BBiioo””
— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30 g of detergent B
• Tests according to the mixed IEC 436/DIN 44990 method
— Recommended programme - - - - - - - - - - - - - - - - - - - - - - - - - - - -
““EEccoo””
— Dosage of detergent - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5 + 25 g of detergent B
NNBB::
When conducting tests using a multi-function tablet:
- Check that the water softener is correctly set for the water hardness (Cf.: Chapter 5 / DETER-
GENT PRODUCTS AND ADJUSTING THE WATER SOFTENER ? • FOR MULTI-FUNCTION PRO-
DUCTS)
- Pull out the detergent distribution drawer and place the tablet in the interior compartment.