Filter
Top Products
25
ROASTING WITH A PROGRAM - KN-8828P
Select a Program with which to roast as described on the previous page. If you
have not yet created any additional Programs use “Program 0” which is the default
Program when entering Program mode. After Selecting a program, begin the roasting
process by pressing the green POWER-START button.
In the display’s Message Center you will now see “Preheat.” The ther-
mometer icon next to the digital temperature display is fl ashing. The roaster
is warming, coming up to temperature. The amount of time it takes to pre-
heat varies depending on the such factors as the ambient air temperature and
whether it has recently been used.
When it is time to add the beans, the machine will beep and the Mes-
sage Center will display the “Add Beans” animation and the roast begins.
Pour the beans into the roaster and the roast will begin.
After the “Add Beans” animation ends the Message Center displays
“Roasting.” The roaster can progress through the Program on its own. The
main Time Display counts down from the total amount of time in the se-
lected Program. The Temperature display shows the current temperature in
the roasting chamber.
While the roast is in progress, if at any time the temperature
display reaches 414 F., a safety feature will alert the user by beeping
a warning. If the user does not press
ENTER within 30 seconds
the beans will be ejected..
You can tell that this segment is currently active because, as seen here, the fi rst
three time-squares are now displayed, and the third is blinking showing that in this
instance that the third-quarter of this segment’s programmed time is active.
The eight Segments of the Program Display show a lot of important informa-
tion. In the temperature area of the Segment shown here you can see that some of the
bars are displayed and some are not.
The single bar above the Segment indicates the programmed temperature goal
for this segment
The space between the single bar and the lower portion of the Segment’s dis-
play graphically represents how close the actual temperature is to reaching the goal
of the programmed temperature.
NOTE: It is possible for the roaster to not reach the programmed temperature goal for any
particular segment. That does not necessarily indicate that there is a problem.
“Roasting.” The roaster can progress through the Program on its own. The
main Time Display counts down from the total amount of time in the se-
lected Program. The Temperature display shows the current temperature in
the roasting chamber.
WARNING: Never leave the roaster unattended during a roast!
1
2
3
4
5