Filter
Top Products
7
This diagram represents most of the parts that are designed to be removed by
the consumer for basic maintenance with the exception of the Heat-Guard Grills.
(see bottom of previous page for heat-guard grill instructions)
Only remove these four Bearing Plate Screws (
7
)
on the face of the Bearing Plate (
8
)
1
Alignment
Pin (11)
2
3
4
5
6
7
8
9
10
11
1 - Rear Filter
2 - Bean Insertion Chute Cover
3 - Cooling Tray
4 - Chaff Tray
5 - Gold Knob
6 - Front Cover
7 - Bearing Plate Screws (4)
8 - Bearing Plate
9 - Roasting Drum
10 - Roasting Chamber
11 - Alignment Pins (2)
12 - Roasting Drum Axle
13 - Top Filter
12
WARNING: Do not attempt further disassembly beyond what
is shown here, or as required in Section VII.
Alignment
Pin (11)
Do not remove these
fi ve smaller screws!
Use the included funnel to
pour the beans into the Hottop
Coffee Roaster as shown here.
13