Filter
Top Products
Hot Drink Center Set-Up Manual
28 6530006
March, 2001
6. Load Cups:
CAUTION
Use only cups which have been designed for use in a hot bever-
age vending machine.
a. Support the cup mechanism in the upright position.
b. Push the latch forward to release the cup mechanism. Continue to sup-
port the cup mechanism while you lower it into the loading position.
c. Remove the turret cover.
OBSERVE PROPER HYGIENE - DO NOT TOUCH THE CUPS!
d. Open the bottom of the wrapper on a stack of cups.
e. Insert the wrapped cups into the turret and pull the wrapper out.
DO NOT FILL CUPS ABOVE THE LEVEL MARKED
ON THE OUTSIDE OF THE CUP TURRETS OR
ABOVE THE “FILL LINE” LABEL INSIDE EACH TUR
-
RET, OR MOTOR JAMS WILL OCCUR.
USE ONLY THE SAME SIZE AND BRAND OF HOT
DRINK CUPS IN EACH TURRET; DO NOT INTERMIX!
f. Replace the turret cover after the turrets have been loaded.
g. Be sure the cup mechanism is locked into the upright position.
1B 1A2
D
OOR
CUP
MECHANISM
VIEW LOOKING DOWN
CUP STACK ROTATION
TURRET DESIGNATIONS