Filter
Top Products
Hot Drink Center Set-Up Manual
34 6530006
March, 2001
IV. Disengaging the Grinder
At certain times, the bean grinder(s) need to be disengaged from the bean canis-
ter(s).
WARNING
Keep your fingers clear of all moving parts.
a. Using a screwdriver han-
dle or other suitable tool,
push up on the catch
spring far enough to free
the catch spring pin from
the grinder shelf bracket
assembly.
b. Pull the grinder and
grinder bracket assembly
towards you.
c. Pivot the grinder and
grinder bracket assembly
down.
d. Re-engage the grinder by pivoting it back up into position.
V. Canister Installation
a. Place the canister
in position as
shown.
b. Engage the pins
on the motor shaft
with the slots in
the canister cou-
pler.
c. Fit tabs on canis-
ter into the slots
on the canister
shelf.
d. To ensure canis-
ter is correctly
engaged with the rear mounting bracket, gently push down on the fron
t
edge of the canister lid.
e. Canister Caps. The parts bag contains a number of red vinyl caps.
Place these caps over the canister nozzle as shown to avoid spilling
product when removing and replacing the canisters.
CATCH
SPRING
CATCH SPRING PIN
GRINDER SHELF
BRACKET ASSEMBLY
GRINDER
BRACKE
T
ASSEMBL
Y
GRINDER
626P0017
FILL
CANISTER
FILL
CANISTER
CANISTER
SHELF
CANISTER
SHELF
PINS ON MOTOR
SHAFT MUST ENGAGE
SLOTS IN CANISTER
COUPLER
PINS ON MOTOR
SHAFT MUST ENGAGE
SLOTS IN CANISTER
COUPLER