Filter
Top Products
TO CLEAN THE INSIDE OF OUTER AND INNER GLASS PANELS
1. Position oven door as shown in fig. 1.
2. Grip inner door panel and handle/outer glass
assembly. Remove two screws and fibre washers
(put to one side) as shown in fig. 2.
3. Pull handle/outer glass assembly at the top
outwards while still holding the inner door panel
and unhook handle/outer glass assembly at the
bottom by lifting
handle/outer glass assembly
upwards as shown in fig. 3.
Take care not to
dislodge rubber grommets in bottom of door.
4. Return the inner door panel to the closed position
as shown in fig. 4.
5. The inside of inner and outer door glass can now
be cleaned using a clean, damp cloth and polished
using a clean, dry cloth.
6. Refit the handle/outer glass assembly by opening
the oven door and hold taking care not to trap your
fingers, see fig. 3. Hook the handle/outer glass
assembly back into the rubber grommets at the
bottom of the inner door panel, see fig. 3.
Fit the handle/outer glass assembly back in
position at the top ensuring the fixing tags on the
handle/outer glass assembly fit inside the door
inner panel. While still holding door together, refit
the two screws and washers, see fig. 2.
CARE AND CLEANING
Warning: Always switch your appliance OFF at the mains supply and allow to cool before cleaning.
Note: The door can be wedged open using a towel between
the door and the side trim thus leaving your hands free.
Warning: Care must be taken when closing the door inner
panel as the door will attempt to snatch shut without the
weight of the handle/outer glass assembly. Avoid trapping
your fingers.
Never operate the ovens without the outer glass panels
correctly refitted.
Fig. 1
Fig. 2
Fig. 3
TWO SCREWS/
WASHERS
DOOR
FIXING
TAG
DOOR
OUTER
GLASS &
HANDLE
DOOR
INNER
PANEL
RUBBER
GROMMETS
Fig. 4
17