Filter
Top Products
4
ASSEMBLY
INSTRUCTIONS
Assembling the Compact Juice
Extractor
1. Place motor base on a clean,
flat surface. Make sure the
motor base is unplugged from
the power outlet (not shown).
2. Be sure the safety bar is in the
unlock position. (It is unlocked
if it is at rest at rear of motor
base.)
3. Place filter housing on top of
motor base by lining up the
grooves in the filter housing
with the arms on motor base.
4. Insert the mesh filter basket/
blade firmly into filter housing
by pressing down on rim of the
filter so it locks securely in
place. Be careful not to touch
the blades in the bottom of
the basket and be sure this
part is inserted before every
use.
5. Place cover on top of filter
housing. Be sure to align the
feed tube over the mesh filter.
6. Move the safety bar into the
lock position by bringing the
bar over the cover until it sits
securely in the grooves.
7. Insert the pulp container into
the rear of the unit by tilting
the opening slightly under the
cover.
8. Place juice pitcher in the front
center of the unit.
9. Insert the food pusher into the
feed tube by aligning the
groove in the food pusher with
the small indent on the inside
of feed tube.
10. Make sure the flow spout is in
the open position. Never juice
with the spout in the closed
position.
1.
2.
3.
4.
5.
6.
7.
9.
8.
10.