Filter
Top Products
8
OPERATION
TURNING CORDLESS
RECHARGEABLE
HAND BLENDER
ON/OFF
Keep hands, hair, clothing and other utensils away from blending blade.
Press and hold rubberized
On/Off button on
top of handle
to turn motor On. The On/Off
button is marked PRESS. The hand blender
will continue to run as long as the switch is
pressed in. To turn hand blender
off, release
On/Off button and the motor will stop.
BLENDING AND MIXING
The specially designed blade is for mixing
and stirring all kinds of foods, including
salad
dressings, powdered drink products,
and sauces.
It is ideal for combining dry
ingredients, and can be used to emulsify
mayonnaise, too.
This blade mixes and stirs while adding only a minimum of air
to your mixture. A gentle up-and-down motion is all you need
to make the most flavorful, full-bodied liquid recipes. Be careful
never to remove the hand blender from the liquid while in
operation.
1. Insert the blending attachment into the motor body.
(See Assembly for Blending Attachment, page 5.)
2. Plug electrical cord into an electrical wall socket.
3. Insert blending shaft into mixture to be blended.
4. Press and hold the ON/OFF button. The hand blender
will continue to run as long as the switch is pressed in.
To turn hand blender OFF, release the ON/OFF button and the
motor will stop.
5. Do not hold the button ON for longer than 50 seconds at
a time.
6. Unplug immediately after use.
WHISKING
1. Insert the whisk attachment into the motor body.
(See, page 7.)
2. Insert the whisk into mixture to be blended.
3. Press and hold the On/Off button. The hand blender will continue to run as
long as the switch is pressed in. To turn hand blender off, release the On/
Off button and the motor will stop.
CHOPPING AND GRINDING
Processing Food
1. Put the prep bowl firmly on a flat sturdy surface like a countertop. Be sure
the blade is assembled to use the blade edge that is appropriate for the
food to be processed.
2. Put food into the prep bowl. Be sure the food is cut into small pieces, and
the bowl is not overloaded.
3. Put the chopper/grinder cover on top of the prep bowl. Be sure the cover is
properly seated.
4. Put the On/Off button on the hand blender.
5. Do not operate the chopper/grinder attachment for longer than 15 seconds
at a time.
Note: Due to the powerful motor provided with this unit, Cuisinart
recommends using one hand to support the chopper/grinder during
operation.
6. When you have finished processing the food, stop the machine by taking
your fingers off the On/Off button.
7. WHEN THE BLADE STOPS MOVING, remove the hand blender motor body
from the chopper/grinder cover, and remove the cover from the
chopper/grinder.
8. Carefully remove the blade assembly, holding it by the gripping ridges on
the plastic sheath. NEVER TOUCH THE BLADE ITSELF.
9. Remove food with a spatula.
Note: Do not operate the chopper/grinder attachment without food
contents in the prep bowl.
b
4a.