Filter
Top Products
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a
Cuisinart
®
Premier
™
Series
Food Processor, and the
standard parts for it:
Dough blade, metal chop-
ping blade, slicing disc,
shredding disc, detachable
stem for discs, spatula,
recipe and instruction book,
and how-to video.
CAUTION:
THE CUTTING TOOLS
HAVE VERY SHARP
EDGES. To avoid injury
when unpacking the
parts, please follow
these instructions:
1. Place the box on a low
table or on the floor
next to the kitchen
counter or table where
you intend to keep the
food processor. Be
sure the box is right
side up.
2. Remove the instruction
book.
3. Remove the cardboard
insert. You will see a
rectangular block of
plastic foam that holds
the processor parts,
each fitted into a cavity
of the foam.
4. Dough blade (A) and
detachable stem for
the discs (B) are in
cavities on one short
side of the foam block.
Remove them first.
5. The plastic spatula (C)
is on the adjacent long
side of the foam block.
Remove it next.
6. The slicing disc (D)
is on the edge of one
of the long sides of
the foam block; the
shredding disc (E)
is on the other side.
Slide them out of their
grooves WITH GREAT
CARE; THE BLADES
ARE VERY SHARP.
7. Only the work bowl
cover (F) and pusher
assembly (G) now
remain in the foam
block. Grasp an edge
of the work bowl cover
and pull it straight up.
The pusher assembly
will slide away from the
work bowl cover and
remain in place. Lift it
straight up to remove.
8. Lift out the foam block.
9. Lift out the video
from its space in the
cardboard frame on
one side of the box.
Then lift out the
cardboard frame.
10. The housing base and
work bowl with metal
blade are at the bottom
of the box. The metal
blade is loose in the
work bowl. Do not
turn over work
bowl without
first removing
metal blade.
11. Remove the base
and bowl together
by grasping the plastic
bowl at the top with
both hands and lifting
the bowl straight up.
Do not rotate the bowl
clockwise on the base.
This will cause the bowl
to separate from the
base.
12. Place the food
processor on a
counter or table and
read the instructions
thoroughly before using
the machine.
13. Save the shipping
cartons and plastic
foam blocks. You may
want to use them at a
later date.
Please watch the
enclosed How-To Video
before using the food
processor.
NOTE: Remember to
return your completed
warranty card with all
information carefully
filled out.
WHEN
REMOVING BLADE:
CAREFULLY REMOVE
THE METAL BLADE BY
GRASPING THE CENTER
WHITE HUB AND LIFTING
IT STRAIGHT UP. NEVER
TOUCH THE BLADES,
AS THEY ARE RAZOR
SHARP.
2
02CU13479 DLC-2007 IB 6/30/03 12:18 PM Page 3