Filter
Top Products
10
Operating the Oven
2. Begin to slide the rack in, lifting the front safety clips
over the front of the oven rack supports.
3. Push the rack all the way in.
4. Grasp the rack in the center of the front and pull. The
rack should come forward while the guides remain in
place.
To remove an oven rack:
• Grasp the rack with both hands and pull it gently
straight out toward you until it stops.
• Lift up until the front safety clips just clear the front
of the rack supports on the oven. Continue to pull out.
Moving the end of the rack back and forth slightly, left
to right, as you pull, will make it easier to remove.
Installing the Oven Racks
WARNING
To reduce the chance of burns, position the oven racks
when the oven is cool. If you must reposition a rack
when the oven is hot, do not allow pot holders to
contact the heating element inside the oven.
Your oven comes with Dacor’s deluxe GlideRack oven
racks. You can pull them out further than other types of
oven racks and still support heavy pots and pans full of
food. They are great for heavier foods and the optional
Dacor baking stone.
To install an oven rack:
1. Align both sets of safety clips (right and left) on the
back of the rack guides with the oven rack supports as
shown below. NOTE: The diagram below shows instal-
lation with the rack guides extended but, the rack
may be installed with or without the guides extended,
whichever is easier.
GlideRack Oven Rack Installation
Front of
rack
Lift front safety clips
over rack supports
Rack
support
Slide oven rack
supports between
back safety clips
Back of
guide
Rack guides