Filter
Top Products
20
Option adjustments
US
CA
How to make option adjustments
Follow the steps
below Rinse agent setting Water softener setting
1
Auto power
option
End of wash
program beeps
option
Closed drawer
option
2
First
Enter Option adjustment mode:
1
Press the button to turn power on. Open DishDrawer.
2
Press and hold the and buttons for 5 seconds until one long beep sounds.
Press the
button to
scroll through
options
red / unlit blue / unlit purple / lit blue / lit red / lit
/
/
/
/
/
Make an
adjustment
The current setting is shown on
the wash program selector in
red lights. If four red lights are
lit, the option selected setting
is set to four. Press the
button to increase the setting.
If there are any red lights
on the wash program
selector:
Press the
button until
all red lights are unlit.
Press the
button to turn the selected option on or off.
Save
Press the button to save the change.
Example
Rinse agent setting set to four
Water softener setting
set to zero
On
Off
On
Off
On
Off
1
The water softener setting may or may not appear in the sequence of options. If it does, we highly recommend it is set to
zero (ie all red lights on the wash program selector should be unlit).
2
The option sequence will start again from the Rinse agent setting.