DCS RDU/RDV Range User Manual


 
12
US
CA
To insert the shelves - MAIN OVEN
Oven use
1
Make sure the guard rail is at the back,
facing up and the slides are not extended.
3
Hook the rear tags over the wires of the
desired shelf position on both side racks.
To remove the shelves
1
Wait for the oven to cool down completely.
2
Hold the shelf firmly with both hands, making sure you grip the wire shelf too to stop it sliding
forward.
3
Pull the shelf forward about ¾ of the way.
4
Lift the rear of the shelf slightly so that the tags clear the side rack wires, then remove.
2
Hold the shelf firmly with both hands,
making sure you grip the wire shelf too to
stop it sliding forward.
4
Push the shelf all the way into the oven,
ensuring the front and rear tags either side
are securely locked behind the side rack
wires.
Front tag
Rear tag
Guard rail