Filter
Top Products
PAGE 7 OF 12
Auto Bake. Automatically
switching the oven on and off.
Auto bake is intended for dishes
such as roasts and casseroles.
These are not affected by a waiting
period in a cold oven.
• Prepare your meal and place it in the
oven.
• Set the cooking period required by
pressing buttons 2 and 6 until the desired
period is displayed.
• Set the stop time by pushing buttons
3 and 6 until the desired stop time is
displayed.
• Release the buttons and the clock will
again display the time of day.
• The word AUTO will light up on the
clock display.
• Now set the selector and oven
thermostat to the desired temperature
setting.
The automatic control will automatically
switch the oven on and the
symbol will light up in the clock display.
Cooking will commence at the selected
temperature and for the selected cooking
period.
The oven will automatically switch off at
the selected stop time and emit an electronic
tone for about one minute
( 4 beeps every 2 seconds ).
To cancel the tone, press any of the buttons.
• The word AUTO will flash until button 4
is pressed and manual control is restored.
• The oven thermostat must be turned to
the OFF position in an anticlockwise
direction.
Example:
Suppose the time of day is 13h00. The food
needs to be cooked for 2 hours at 180°C and
it should be ready to serve at 18h00.
Here’s what to do.
• Ensure the clock is set to the correct time
of day, 13.00.
• Press buttons 2 and 6 until 02.00 is
displayed
• Press buttons 3 and 6 until 18.00 is
displayed.
• Set the selector to the desired cooking
mode and the oven thermostat to 180°C
It is not advisable to use the Auto bake
function for cooking periods that are less
than 60 minutes.
Important
If the Automatic start and or stop functions
are not required, the clock must be set to
manual mode. Unless this is done, the oven
will not work. Press button 4.