Filter
Top Products
41
REASSEMBLING THE INNER PANE
To reassemble the inner pane of the
oven door operate as follows:
– Make sure the door is locked open
(see Fig. 45).
– Check the correct positioning of the
no. 4 (four) silicon rubbers D (fig. 48).
– Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
– Insert the inner pane in the left E and
right F side guides (fig. 49) and gen-
tly let it slide up to the retainers H (fig.
50).
– Reassemble the seal G in the correct
way (fig. 51) by hooking the no. 3 fix-
ing hooks in the proper holes (fig. 52).
– Open completely the oven door and
close the lever A on the left and right
hinges (fig. 54).
A
It is normal the opened gap between the
top edge of the inner glass and the sealed
gasket. This allows the cooling air
circulation
The oven door
has a sealed
gasket in the
top part.
D
Figure 52
Figure 48
E
F
Figure 51
H
Figure 50
Figure 49
D
E
F
H
G
Figure 53
Figure 54