Filter
Top Products
23
BURNERS AND GRIDS
■ These parts can be removed and cleaned with appropriate products.
■ After cleaning, the burners and their ame spreaders must be well dried and correctly
replaced.
■ It is very important to check that the burner ame spreader and the cap have been
correctly positioned. Failure to do so can cause serious problems.
■ Check that the electrode “S” (gs. 18 - 21) next to each burner is always clean to en-
sure trouble-free sparking.
■ Check that the probe “T” (gs. 18 - 21) next to each burner is always clean to ensure
correct operation of the safety valves.
■ Both the probe and ignition plug must be very carefully cleaned.
■ Note: To avoid damage to the electric ignition do not use it when the burners are
not in place.
IMPORTANT WARNING
NEVER unscrew the burner plate xing screws (g. 17).
The burner plates can be removed ONLY by an authorised service agent.
Damage to the appliance will occur if not observing this condition and this
may result in serious injury to the user.
The manufacturer declines every responsibility for any inconvenience resul-
ting from the inobservance of this condition.
Figure 17
Only for the models with triple-ring
burner (DEGH70BG, DEGH90BG)