Filter
Top Products
25
CORRECT POSITIONING OF THE
TRIPLE RING BURNER
(ONLY FOR
THE MODELS DEGH70BG, DE-
GH90BG)
The triple ring burner must be correctly po-
sitioned (see gs. 21, 22 and 23).
■ The burner ribs must be tted in their
housing as shown by the arrow.
■ The burner correctly positioned must
not rotate.
■ Then position the cap “A” and the ring
“B”. They shall be level.
The pan support shall be correctly positio-
ned as indicated in g. 24.
■ The pan support shall be level and
must not rotate.
■ Be sure NOT to t the auxiliary, semi-
rapid or rapid burner pan support on
the triple-ring burner.
■ The auxiliary, semi-rapid or rapid bur-
ner pan support IS ONLY to be used
on the auxiliary, semi-rapid or rapid
burners.
A
B
Flame
failure
probe “T”
Ignitor “S”
Figure 21
Figure 22
Figure 23
Figure 24