Filter
Top Products
4. Move the milk frother to the outside of the machine.
5. Prepare the espresso / coffee as described in
section 12 of the manual, using sufficiently large cups.
6. Press the steam function button (Figure 17). The
light (Figure 18) starts flashing to indicate that the
machine is heating up.
7. When the light remains on steadily (without
flashing), the temperature of the machine has reached the ideal
temperature for making steam.
8. Immediately after (within a span of no more than 2
minutes, otherwise the machine automatically
switches back to the espresso / coffee function), dip
the milk frother into the container of milk (Figure 19).
9. Make sure not to immerse the line on the milk
frother (indicated by the arrow in Figure 20). Turn the
steam control dial half a turn counter-clockwise until
it stops (Figure 7). Use caution, steam is hot!
10. The steam released will make the milk froth
increase in volume.
Note: To make a creamier froth, dip the milk frother
into the milk and rotate the container with slow
movements from the bottom to the top. It is
recommended to limit steam delivery to no more
than 2 minutes at a time.
11. Once you have achieved the desired froth, stop the steam flow by
turning the steam control dial clockwise until it stops
(Figure 8), and the press the steam function button
(Figure 17 ) to deactivate steam function.
12. Note (Making espresso / coffee after using steam
function): Immediately after using the milk frother,
press the steam function button to deactivate the
steam function. If you press the or the
button to make espresso / coffee again, the
machine is too hot to make espresso / coffee. The green and
lights will flash indicating that the temperature is not suitable for making
espresso / coffee. Simply wait 10 minutes for the machine to cool
down. The lights will illuminate steadily (without flashing) indicating that
the machine is now ready to make espresso / coffee again.
Tip:
To cool the machine down more quickly after having deactivated
the steam function, turn the steam control dial and release some water
from the milk frother into a container, until the green and lights
stop flashing.
21
Figure 17
Figure 18
Figure 19
Figure 20
EAM3200_manual_final 5/19/04 11:50 AM Page 21