Filter
Top Products
22
14: Processing Hot Water Through the
Frother
Please follow the instructions below.
1. Make sure that the green and lights are on steadily (not
flashing).
2. Turn the milk frother towards the outside of the machine (Figure 3).
3. Position a container underneath the milk frother (Figure 3).
4. Turn the steam control dial half a turn counter-clockwise until it stops.
(Figure 7).
5. Hot water will release from the milk frother and start to fill the
container. Use caution, water is hot!
6. To stop the flow of hot water, turn the steam control dial all the way
clockwise. (Figure 8) and return the milk frother to the original position
towards the center of the machine.
7. Note: It is recommended to deliver hot water for no more than 2
minutes.
15: Cleaning and Maintenance
• WARNING: Before performing any cleaning operations, the machine
MUST be cooled down, turned off (unless otherwise noted) and
unplugged from the power outlet (unless otherwise noted).
• The machine must be cleaned in order to function properly.
• Never immerse the machine in water or other liquid. It’s an electrical
appliance.
• Do not use solvents or harsh abrasive detergents.
• The outside surface of the machine can be cleaned with a soft
damp cloth.
• All of the components (parts and accessories) of the machine must
not be washed in the dishwasher.
15.1 Cleaning the Used Coffee Container:
• Whenever the light illuminates steadily, the used coffee
container needs to be cleaned.
• Remove the used coffee container and discard the coffee grounds.
• Wash the container with warm water and mild detergent. Rinse and
dry thoroughly.
• Replace the used coffee container.
15.2 Cleaning the Water Tank:
• The water tank should be cleaned regularly.
EAM3200_manual_final 5/19/04 11:50 AM Page 22