Filter
Top Products
29
Warning Lights: Description Explanation Action
The light is
flashing.
The service door is open.
If the service door cannot be
closed, check that the brewing
system is inserted correctly.
The light is on
steadily and
green lights are
flashing.
After cleaning, the brewing
system has probably been left
out of the machine.
The inside of the machine is
very dirty.
Replace the brewing system.
Thoroughly clean the inside of
the machine as described in
section 15 of the manual.
The light is
flashing.
The ground coffee funnel is
very dirty.
Empty the funnel with the help
of a knife.
Problems: Possible Cause(s) Solution
The espresso / coffee is not
hot
•The cups have not been
pre-heated
•The brewing system is too
cold
•Heat cups by rinsing them in hot
water or leave them on the cup
warmer
•Heat the brewing system by pressing
the button before making the
espresso / coffee (Figure 29)
The espresso / coffee does
not have a crema
•The machine uses too
little coffee during the
brewing process
•The coffee is ground too
coarse
•The ground coffee is not
correct
•Turn the espresso / coffee flavor dial
(Figure 9) a little clockwise
•Turn the grinding dial (Figure 3) one
click counter-clockwise
•Use another brand or coffee blend
The espresso / coffee
comes out too slowly
•The coffee is ground too
fine
•The machine uses too
much coffee during the
brewing process
•Turn the grinding dial (Figure 3) one
click clockwise
•Turn the espresso / coffee flavor dial
(Figure 9) a little counter-clockwise
The espresso / coffee
comes out too quickly
•The coffee is ground too
coarse
•The machines uses too
little coffee during the
brewing process
•Turn the grinding dial (Figure 3) one
click counter-clockwise
•Turn the espresso / coffee flavor dial
(Figure 9) a little clockwise
EAM3200_manual_final 5/19/04 11:50 AM Page 29