Filter
Top Products
20
2. Remove the new filter from the packaging;
3. Turn the date indicator disk (see fig. 29) until
the next 2 months of use are displayed (the
filter lasts about two months);
4. Refill the tank;
5. Insert the filter in the water tank and immerse
it completely, sloping it to enable the air
bubbles to escape (fig. 30);
6. Place the filter in the filter housing (fig. 31A)
and press as far as it will go. Close the tank
with the lid (fig. 31B), then replace the tank
in the machine;
7. Position a container with a minimum
capacity of 3.4 oz / 100 ml under the hot
water spout;
8. Press the P button to enter the menu;
9. Turn the selection knob (fig. 7) until “Replace
“ is displayed;
10. Press the button;
11. The message “Confirm?” is displayed;
12. Press the button to confirm the
selection;
13. “Hot Water… Confirm?” is displayed.
14. Press the button to confirm the
selection. The appliance begins delivering
hot water and the message “Please Wait... “
is displayed.
15. After delivery, the appliance returns
automatically to the “Ready for coffee”
position.
The new filter is now active and you can use the
coffee maker.
Removing the filter
If you want to continue using the appliance
without a filter, you must remove it and notify the
appliance of its removal as follows:
1. Extract the tank and exhausted filter;
2. Press the P button to enter the menu;
3. Turn the selection knob (fig. 7) until “Install
filter*” is displayed;
4. Press the button;
5. “Deactivate?” is displayed;
6. Press the button to confirm and the
button to exit the menu.
TECHNICAL SPECIFICATION
Voltage: 120V~ 60Hz
Absorbed power: 1250W
Pressure: 15 bars
Water tank capacity: 60 fl oz max
Size LxHxD: 9.4x13.8x16.9 in
Cable length: 3.5 ft
Weight: 20,22 lb.
Beans container capacity: 8.8 oz max