D-Link DAP-1650 Ventilation Hood User Manual


 
34D-Link DAP-1650 User Manual
Section 3 - Conguration
Use the drop-down menu to select the appropriate transmission
rate in Mbits per second. Many users will want to use the default
setting, Best (automatic).
Select the channel width:
Auto 20/40/80 - Select this option if you are using a combination
of 802.11ac, 802.11n, and other wireless devices.
Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20 MHz - Select if you are not using any 802.11n wireless clients.
Select whether you would like the network name (SSID) of your
wireless network to be Visible or Invisible to wireless clients.
If Invisible, the SSID of the DAP-1650 will not be seen by site
survey utilities, so wireless clients will have to manually enter
the SSID of your wireless network in order to connect to it.
For information on how to set up wireless security, please refer
to “Conguring Wireless Security” on page 36.
Click Save Settings at the bottom of the page to save the
current conguration.
Transmission
Rate:
Channel Width:
Visibility
Status:
Security Mode: