Filter
Top Products
90D-Link DAP-1650 User Manual
Section 6 - Troubleshooting
• Congure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your device in the address bar. This should
open the login page for your the web management.
• If you still cannot access the conguration, unplug the power to the device for 10 seconds and plug back in. Wait about 30
seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your device. Unfortunately this process will change all your settings back to the
factory defaults.
To reset the device, locate the reset button (hole) on the rear panel of the unit. With the device powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the device will go through its reboot process. Wait about 30
seconds to access the device. The default address is http://dlinkap.local. When logging in, the username is Admin and leave
the password box empty.