67D-Link DAP-1650 User Manual
Section 3 - Conguration
System
The system page can be used to save and restore the device’s conguration, as well as restore the factory default settings.
Click Save to save the current conguration to a le on your
local computer. After clicking, a Save File dialog will appear,
prompting you to save the conguration le on your computer.
Click Browse to locate a previously saved conguration le
on your local computer. Once the le has been located, click
Upload Settings to apply the conguration in the le to the
device.
Note: This will overwrite any current conguration.
Click Restore Device to reset the DAP-1650’s settings to the
factory defaults.
Warning: This will erase all current settings and cannot be
undone.
Click Reboot to reboot the device. You will need to log in to the
device again once the reboot has been completed.
Click to remove a language pack from the device.
Save Settings to
Local Hard Drive:
Load Settings
From Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Remove
Language Pack:
