Filter
Top Products
13
Adjusting the Temperature
This mini kegerator has a temperature range from 38°F to 54°F.
Press the button on the control panel to lower the temperature by 1
degree increments.
Allow at least 24 hours before storing your keg and to allow the
temperature to acclimate.
Press the
button on the control panel to increase the temperature by 1
degree increments.
TROUBLESHOOTING
Before Calling for Help
If the unit appears to be malfunctioning, read through the manual first. If
the problem persists, check the Troubleshooting Guide below. The
problem could be something that can easily be solved or explained.
Issue Possible cause Solution
The mini kegerator does
not turn on.
There is a power failure.
Ensure the power outlet has power by testing with another
appliance.
The kegerator is not plugged
in.
Plug the unit in to a power outlet that has sufficient power.
A house fuse has blown or
the circuit breaker is tripped.
Replace the broken fuse in your fuse box or reset the
breaker.
The mini kegerator will
not reach the desired
temperature
The mini kegerator is placed
too close to a heat source.
Keep the mini kegerator away from direct sun light or
other heat sources.
The mini kegerator does not
have sufficient ventilation.
Make sure there is 3” of ventilation room all around the
unit.
The door is opened too
frequently or for a long
period of time.
Close the door and do not open the door too frequently or
for a long period of time.
The faucet is leaking. Hose not properly installed.
Make sure the dispenser handle is pinching the rubber
hose. Remove the side access door to access the hose
that leads to the dispenser.
While using the optional
accessory kit, CO
2
is
leaking.
Rubber ring is not installed
on piercing tube
Make sure the rubber ring is installed.
Defective CO
2
Piercing
Adapter or missing gasket
Contact customer service.
Note: Whether your mini
kegerator can reach the
actual set temperature
depends on the ambient
environmental conditions.