Filter
Top Products
FITTING INTO THE SPACE
BETWEEN CABINETS
Ensure the appliance is in front of the
cabinet. See Fig. 13.
Take out all oven furniture before installation
to reduce the weight you need to lift.
To place the appliance into the space
between cabinetry follow the procedure
below:
N.B. Two people will be required to carry
out the lifting procedure.
Warning: Do not attempt to lift this appliance
by the handle(s).
Each person should squat either side of the
appliance.
Tilt the appliance so that your hands can
support the underside of the appliance.
Raise the appliance to the correct height.
Rest the rear underside of the appliance on
the mounting brackets while your hands
support the front.
The appliance can be pushed fully into the
space. Take care to avoid fouling the mains
lead.
Ensure the appliance is central and level.
When the appliance is fully housed, screw
the stability screws (supplied with the
appliance) into the underside of the
worksurface in the positions indicated (see
Fig. 14), taking care not to distort the trim. It
is advisable to turn each screw alternately to
avoid damaging the trim.
INSTALLATION INSTRUCTIONS
IMPORTANT: Ensure that the oven is
switched off at the wall before any
further work is carried out.
Fig.13
Fig.14
61