Filter
Top Products
Appliance Description 65300 K
12
Heat Setting Selection
+
and
-
For setting and adjusting the heat setting (
!
to
)
) for the selected
cooking zone, or when in timer mode, to set or change the required
cooking time.
– The heat setting or the cooking time is increased using the
+
button
and the automatic warm up function activated.
– The heat setting or the cooking time is decreased using the
-
but-
ton.
“Lock“ button and indicator
o
To lock the control panel against inadvertent changes to the setting,
touch the button for approx. two seconds. The lock is lifted by touching
the button again for two seconds.
The lock can also be used as a child safety measure.
The indicator illuminates when the control panel is locked.
“
Triple Ring Zone/Casserole Zone“ button/indicators
k
For switching on and off the outer or middle cooking zone of the triple
ring cooking zone, and the casserole zone.
To switch on, the relevant cooking zone must be selected using the
cooking zone buttons.
The indicators illuminate if the outer or middle cooking zone of the tri-
ple ring zone, or the casserole zone is switched on.
“Timer“ button and display field
w
For activating the timer function for the selected cooking zone.
The display field shows the cooking time set or remaining for the
selected cooking zone.
The timer can also be used as an “Egg Timer“. Set the required cooking
time. The timer counts the remaining time down back to zero. This
function is not assigned to any cooking zone and programming is not
possible in this mode of operation.
“Timer Active“
indicators: the four “Timer Active“ indicators show the
cooking zones for which the timer is active. Each of the four cooking
zones has its own indicator.
It is not possible to use the timer functions “Timer“ and “Egg Timer“
simultaneously.