Electrolux 65300 K Range User Manual


 
Before Using for the First Time
14
Before Using for the First Time
Cleaning for the first time
Wipe the ceramic glass cooking surface with a damp cloth to remove
any traces left from manufacturing.
1
Important:
Do not use any caustic, abrasive cleaners! The surface could
be damaged.
Operation of the Cooking Surface
TOUCH CONTROL sensor buttons
To operate the TOUCH CONTROL sensor buttons, place your finger flat
on the desired button until the corresponding indicator illuminates, or
extinguishes, or the desired function is performed.
For quicker adjustment leave your finger on the button until the
desired value is reached.
All entries are acknowledged by an acoustic signal.
Switching on the appliance
0
Switch on the appliance using the mains On/Off button.
The Heat Setting/Residual Heat display fields indicate
j
.
3
After the mains On/Off button has been operated to switch on your
appliance, one of the cooking zones must be selected using the cooking
zone selection buttons within approx. 10 seconds. Otherwise the appli-
ance switches off again for safety reasons.
Switching off the appliance
0
Operate the mains On/Off button to completely switch off the appli-
ance.
3
After the individual cooking zones or the entire cooking surface have/
has been switched off, the presence of residual heat is indicated by
h
(as in Hot) in the Heat Setting/Residual Heat display fields of the
respective cooking zones.
If all cooking zones are switched off, the appliance switches off auto-
matically after a period of time.