Filter
Top Products
OPERATING INSTRUCTIONS
13
Before first use
Initial Cleaning
Before you use the oven for the first time, you should clean it thor-
oughly. You can switch on the oven lighting to make cleaning easier.
☞ 1. Turn the oven function switch to oven lighting .
2. Remove all accessories and the side rails, and wash with warm water
and washing up liquid.
3. Also wipe out the oven with warm water and washing up liquid, and
dry.
4. Clean the front of the appliance with a damp cloth only.
Tip: In the case of stainless steel fronts, use commercially available
stainless steel cleaners that also form a protective film against finger
marks.
Important: Do not use any caustic or abrasive cleaners! The surface
could be damaged.
Setting the clock
Tip: The oven will not function until the clock is set.
The clock must be set before the oven is used and whenever power has
been disconnected to the appliance. If the clock needs to be set, you
will see ”0.00” flashing in the display.
☞
Use “+” and “-” to set the right time.
After around 3 seconds, the new time
will be accepted and the display will
stop blinking.
i
!