Filter
Top Products
7
The Safety Thermostat
This oven is provided with a safety thermostat.
In case of malfunctioning of the main thermostat,
and consequential over-heating, the safety
device will stop the power supply to the
appliance. If this happens, call your local Service
Force Centre. Under no circumstances should
you attempt to repair the appliance yourself.
The cooling fan
The cooling fan operates during cooking. Air is
expelled through vents between the oven door
and the control panel.
The cooling fan may run on after the oven is
switched off to keep the controls cool. This is
quite normal.
The Oven Safety Devices
When the oven is first installed
When the oven is first connected to the electrical
supply, or when supply is restored after a long
power failure, the upper section of the display
shows this message:
WELCOME TO * KRONOS -3 * BASIC - 2 *
DANSK * DEUTSCH * ENGLISH * ESPANOL *
FRANCAIS * ÅËËÇÍÉÊÁ * ITALIANO *
NEDERLANDS * NORSK * PORTUGUES *
SVENSKA * ÐÓÑÑÊÈÉ
This message lists all the languages which can be
chosen to operate with the Oven Electronic Control
(Fig. 1).
Symbol flashing near the "Clock Symbol"
means that you need to set the current time of
day before using the oven.
To set the correct time of day:
1. Touch the "Time Function Control" .
While symbol flashes near the "Clock
Symbol" , set the current time of day
touching controls or (Fig. 2). Once
you have set the time, the symbol keeps
flashing for 5 seconds and then goes out.
This means that the setting has been stored
in the Electronic Control memory.
Fig. 1
Fig. 2