54
What to do if …
Problem Possible cause Remedy
The oven does not heat
up
The oven is not switched on Switch the oven on
The clock is not set Set the current time on the
clock
The required settings have
not been set
Check the settings
The oven’s safety cut-out has
been tripped
See “Safety fuse”
The fuse in the house’s elec-
trical wiring (fuse box) has
been tripped
Check fuse. If the fuses trip
repeatedly, please call an au-
thorised electrician
The oven lighting is not
operating
The oven bulb is faulty Change the oven bulb
Pyroluxe is not working
(“C1” appears in the clock
display)
The oven shelf supports have
not been removed
Remove oven shelf support
The oven door is locked Appliance is not connected
to the electricity; door lock is
activated
Connect appliance to the
electricity and wait at least
15 minutes until the door
lock is automatically released
The oven does not heat
up. Time is lit
Demo mode is on Keep Select button
pressed for 2 seconds, then
within 2 seconds press and
hold buttons Select and
for 2 seconds
F1 appears in the display Door is not closed properly Close the door properly and
start the pyroluxe again. If
displayed again, please con-
tact your local Service Force
Centre
F2 appears in the display The door cannot be opened Switch off the appliance via
the house fuse or the safety
switch in the fuse box and
switch it on again.
If displayed again, please
contact your local Service
Force Centre