Filter
Top Products
12 electrolux Installation / Use
EN
Electrical Connection
• Connect the hood to the mains
through a two-pole switch having a
contact gap of at least 3 mm.
• Remove the grease fi lters (see para-
graph Maintenance) being sure that
the connector of the feeding cable is
correctly inserted in the socket placed
on the side of the fan.
• Connect the control connector Cmd.
• Connect the lights connector Lux.
• Place the connectors in the junction
box 24 and close it using the 2 screws
12e (2,9 x 9,5) provided.
• Fix the junction box to the hood body
using the 2 screws 12c (2,9 x 6,5)
provided.
• For the recirculation version, fi t the
activated carbon odour fi lter.
• Replace the grease fi lters.
USE
The hood can be switched on pushing
directly onto the requested speed
without fi rstly having to select 0/1 but-
ton
L T1 T2 T3 T4 T5 F
24
12e
Cmd
12c
Lux