Filter
Top Products
10 electrolux MAINTENANCE AND CLEANING
EN
Changing the Light Bulb
1. Remove the screw fi xing the lighting
support, disconnect the cooker hood
from the mains supply.
2. Pull the lighting support downwards.
3. Remove the light bulb by unscrewing
it anticlockwise.
4. Insert the new light bulb into the
lighting support and screw it clockwise
taking care not to overtighten the light
bulb.
If one of the light bulbs has failed to
function check that the lamps is fully
screwed into the lighting support. If
lamp failure has occurred then it should
be replaced with a 40W clear cylindrical
lamp with an E14 screw cap.
Replacement fi lters and light bulbs
can be purchased from your local
Service Force Centre.