Filter
Top Products
INSTALLING THE COOKER HOOD electrolux 21
EN
Fitting the Hood Body
• Before starting to fi x the hood body,
tighten the two screws Vr located on
the top of the hood body.
• Hook the hood body onto the two
4.2x44.4mm screws item 12a.
• Fully tighten the screws item 12a.
• Using a screw driver and spirit level,
adjust the screws item Vr until the
hood body is level.
Extraction
The cooker hood is more effective when
used in the extraction mode (ducted to
the outside).
Venting kits may be purchased
through your retailer or DIY store,
and must be ducted to an outside
vent of Ø125mm (5”) or Ø150mm
(6”).
The ducting used must be manufactured
from fi re retardent material conforming
to the relevant British Standard or DIN
4102-B1.
When the cooker hood is ducted to
the outside the charcoal fi lter must be
removed.
12a
Vr