Filter
Top Products
INSTALLING THE COOKER HOOD electrolux 19
EN
A: Built-in Electric Hob: 650mm clearance
B: Built-in Gas hob: 650mm clearance
C: Slot-in Electric Cooker: 685mm clearance
D: Slot-in Gas Cooker: 787mm clearance
Hob
Clearance Height
The cooker hood is designed to be
fi tted over a cooking appliance at the
clearance heights stated, providing
the maximum output of the appliance
beneath does not exceed the maximums
quoted in the Technical Specifi cations.
If the output of the appliance below the
cooker hood exceeds the maximum
outputs quoted, please refer to the
cooker manufacturer’s installation
instructions.
A clearance height of 650mm (25 1/2 ”)
is required when installed above a built-
in electric hob, or 650mm (25 1/2 ”)
when installed above a built-in gas hob.
A clearance height of 685mm (27”) is
required when installed above a slot-in
electric cooker, or 787mm
(30 1/2 ”) when installed above a slot-in
gas cooker.
When installed between adjoining wall
cabinets, the wall cabinets must not
overhang the hob and the distance
between the underside of the cabinet
and the worktop must be 450mm. If
the height of the wall cabinet is less
than 450mm, a gap of 50mm must be
maintained either side of the hob.
This cooker hood must not be instal-
led above a cooking appliance with a
high level grill.
The hood can be installed above these
heights but for optimum performance
it should be installed at the distances
quoted for the appropriate heat
source.
This appliance can be used in either
extraction mode (ducting) or recircu-
lation mode (recycling).
The hood is supplied suitable for
recirculation with the charcoal fi lters
fi tted.
When used in the extraction mode
(ducting) the charcoal fi lters are not
required and must be removed and
destroyed.