Filter
Top Products
2. Rotate the fat trap to the left from the
oven roof.
3. Wash the fat trap in hot water with wash-
ing-up liquid and soft brush. You can al-
so wash it in dishwasher. With stubborn
dirt, soak for a while in hot water with
soap suds.
4. Insert the fat trap in reverse order. Make
sure the heating element has a good fit
in the connecting socket when inserting.
Oven lamp
Warning! There is a danger of
electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or
switch off the circuit breaker.
Put a cloth on the bottom of the oven
for protection of the oven light and
glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with applicable
300°C heat-resistant oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
Replacing the oven lamp:
1. You can find the lamp glass cover at the
left side of the cavity. Remove the left
shelf support rail.
2. Use a narrow, blunt object (e.g. a tea-
spoon) to take off the glass cover and
clean it.
3. If necessary: Replace the oven lamp
with applicable 300°C heat-resistant
oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
5. Install the left shelf support rail.
Removing the heating elements
You can remove the top and bottom heat-
ing elements to clean the oven cavity. In
this case proceed as follows for possible
cleaning actions:
Warning! Ensure that the oven has
cooled down sufficiently so that you
can touch heating elements safely!
There is a risk of burns!
electrolux 19