Filter
Top Products
Use of the double zone
Warning! To set double zone on turn
the control knob with the double zone
to the right (do not turn it thought the
stop position).
1. Turn the control knob to the right - to po-
sition "9".
2. Turn the control knob slowly to symbol
until you feel a slight resistance.
At this time the two cooking zones are on.
3. To set necessary heat setting refer to
"Heat settings".
CLOCK FUNCTIONS
Display
21 3
56 4
1 Function Indicators
2 Time display
3 Function Indicators
4 Button " + "
5 Selector Button
6 Button " - "
Setting the clock functions
1. Set an oven function and temperature
(necessary only for Duration and End).
2. Push the Selection button again and
again until necessary function indicator
flashes.
3.
To set the time for Minute minder
,
Duration
or End , use " + " or " - "
button.
The related function indicator comes on.
When the time period is completed, the
function indicator flashes and an acous-
tic signal sounds for 2 minutes.
With the functions Duration and End
the oven stops automatically.
4. Push any button to stop the signal.
5. Turn the oven functions control knob
and the temperature control knob to off
position.
Clock function Application
Time of day Shows the time. To set, change or check the time.
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be used at
the same time, if the oven is to be
switched on and off automatically later.
In this case first set Duration , then
End
.
electrolux 7