Filter
Top Products
14
Setting cooling temperatures
1 Touch the glass panel to illuminate the
display to the Plus (+) and minus (-)
indicators which appear on either side of the
displayed temperatures.
2 Press the + or – indicator to adjust the
temperature to the desired setting.
The temperature display will begin to blink
with the first touch. The display times out after
a minute and returns to the basic display.
Alarms
Door Ajar If the door has been left open for an
extended period of time, an alarm will
sound and the door ajar indicator will
display on the right side of the display. The
alarm is turned off by closing the door. The
mute sounds key will blink to prompt the
reset of any pending alarms. Press this key
to reset any system alarms.
High Temp
In the event of a high temperature condi-
tion, the temperature display will blink and
display “HI,” and the high temp alert will be
displayed. The mute sounds icon will blink
until pressed, acknowledging the alarm,
at which time the blinking will stop. All
other modes are turned off until the alarm
is acknowledged. The high temp alert and
“HI” will stay illuminated until a normal
safe range operating temperature has been
reached, at which time the temperature
display will display the actual temperature.
Power Fail
In the event of a power failure, the power fail
alert will be displayed and the temperature
display will blink until the mute sounds icon
is pressed, acknowledging the alarm. Other
modes may be turned off until the alarm is
acknowledged. The power fail alert is turned
off and the refrigerator will resume normal
operation. The high temp alarm may also
be illuminated until a safe operating range
temperature has been reached.
Controls
Touch the icon to activate the options below.
Anyofthefollowingoptionsthatareactivatedhave
a red indicator light above the icon.
fast ice Increases the production of ice
fast freeze Activates a faster rate for freezing food
dispenser light On / Off
control lock
Press and hold for three seconds to activate
and deactivate. This restricts undesired
changes to the refrigerators settings and
prevents use of the ice and water dispenser.
vacation mode
Conserves energy by increasing the time
between automatic defrost. It is automatically
deactivated by opening the refrigerator door after
24 hours. This feature is automatically activated
during long periods between door openings.
Vacation mode is manually activated when the red
indicator is lit.
water filter
Touch to display filter condition status.
Press and hold for three seconds to reset.
air filter
Touch to display filter status. Press and
hold for three seconds to reset.
temp display
Touch to toggle the freezer and fridge
temps display on and off.
Touch and hold temp display to toggle
display from Fahrenheit to Celsius.
mute sounds
Tones emitted by each keypress can be
turned off based on user preference. The
sounds are muted when the red indicator is
lit. Warning signals will stay active.
factory default
Resets all refrigerator settings such as
temp, temp display and ring tones to their
factory default settings.
on off
Press and hold for three seconds to turn off
the cooling system to clean the refrigera-
tor. It also turns off all dispenser functions.
The temperature display will read OFF.
IMPORTANT
Pressing the system off icon does not turn off
power to your refrigerator. You must unplug the
power cord from the wall outlet.
Your refrigerator is equipped with a Glass Touch
Panel user interface display. It is only necessary
to touch the glass. There is no need to press with
force. There are three dispenser modes:
1 Water
2 Ice Cubes
3 Crushed Ice
Aredindicatorlightwillbeilluminatedabovetheactivemode.
IQ-Touch
TM
(some models)