Filter
Top Products
10
Freezer Features
Interior Light
The light comes on automatically when the door
is opened. To replace the light bulb, turn the
temperature control to “OFF” and unplug the
electrical cord. Replace the old bulb with a bulb of
the same type and wattage.
Full Access Wire Basket
TheFullAccessWireBasket,locatedatthebottom
of the freezer, provides separate storage space for
items that are difficult to store on freezer shelves.
Security Lock with Pop-Out Key
This security lock fastens the door snug, ensuring
the stored food is secure. To lock or unlock the
freezer, push the key into the lock and turn. The key
pops out of the lock after it has been turned.
Adjustable Glass Shelf
This shelf can be moved one of two positions. Lift
the shelf up and out to move to the desired position.
Basket Divider
Use these handy dividers to keep the various
items stored in your baskets more organized. To
change the location of the divider simply slide your
basket out, lift up on each end of the divider until
it is disengaged from the basket, place divider in
the desired location (make sure it is between two
vertical wires) and press down firmly on each end
until it snaps into place.
Small Item Shelf
Use this shelf to store several of your single-serving
microwavable dinners or other small items that you
want to keep in an easy-to-reach spot.
Tilt-Out Shelf
This shelf is located inside on the freezer door
and provides additional storage space. To access
an item, tilt the top of the “basket” shelf down.
Pizza Shelf
Here is the place to store up to four extra-large
boxes of frozen pizza without ever having to dig
them out from beneath a pile of other stored goods.
To change the location of the pizza shelf: support
the bottom center of the shelf with one hand and
use your other hand to gently ease each support
tab outward until they have all dropped between
the edge of the shelf and the liner wall. It may help
to slide the supporting shelf slightly to the side
opposite that in which you are removing the tabs in
order to get a larger gap between the edge of the
supporting shelf and the liner wall.
Next,locatethepizzashelfbeneaththeshelf
nearest your desired location and snap each tab
upwards between the wire or glass shelf and liner
until the tab has snapped into place and is resting
on top of the supporting shelf. Repeat for each tab
until all four are firmly in place and then load with
desired items.